|
 |
Model： |
APF-05 |
|
Main accessories material: |
Military grade austenitic 316L stainless steel Precision omentum |
|
Water flow： |
1 T /
h |
|
Working pressure:： |
0.2
Mpa~0.4 Mpa |
|
Suitable temperature： |
5℃~40℃ |
|
Function Description： |
Patented soft scratch design / high-intensity explosion-proof performance / large amount of water |
|
And out of the water caliber： |
3分(3/8 inch)內牙 |
|
Filtration precision： |
5 μm（Micron） |
|
Dimensions (L x W x H)： |
70mm
x 70mm x 280mm |
Product description：
Branch pre-filter is generally mounted in a branch pipe, mainly to remove the tap secondary pollution generated by the precipitation of impurities, flotage flocs can be directly instead PP cotton, provided the water purifier, the water and other wading equipment The front-end filter protection, save money, effective and long service life, do not have to replace the filter at any time sewage intuitive effect, filtration and high precision.
Features ︰
1. 5 micron filter omentum, very minor impurities can be removed, to reach PP cotton filter effects.
2. Sewage functions at any time to remove the trapped impurities and prevent secondary pollution.
3. Patent sewage clean soft scraping gently a few spin, the sewage more scientific, more thorough.
4. Explosion-proof, waterproof hammer than PP cotton greatly improved, greatly reduces the leakage risk.
5. Oversized water, reached 1T / h.。
6. Austenitic 316L military-grade stainless steel precision omentum, useful life for decades.
7. The core components are made of imported materials specially compression capability, safe and reliable.
8. Transparent cover, use effect visual, sewage effects intuitive, easier to use, rest assured.
Installation︰
1.First inspections may be appropriate resettlement prefilter position, 20CM height (to be reserved to facilitate sewage).
2.Six taps and hex nut assembly, six taps fully wound raw material belt, then wound good connector components connected to a water purification mouth
Brought out processed using the same method to another outlet.
3.Ring onto the fitting components with large pieces of copper two link tightened, and then slowly open the inlet valve, in the absence of any leaks or water seepage, and that is to complete the installation.
Maintenance way︰Pre-filter to use after a period of time, to see whether the sediment filter impurities or dirt can be transparent filter housing
1.Sewage (sewage once a month)
（1）Turn off the water purification and water at the water stop valve, in order to avoid reflux.
（2）placing the container at the bottom of the drain valve body, open the drain valve for wastewater effluent.
（3 ）sewage is complete, open the influent and effluent at water stop valve can be.
2.Cleaning filter (every 3-6 months cleaning time)
（1）close the influent and effluent at water stop valve to avoid reflux.
（2）removal tool, turn on the transparent filter housing, remove the filter assembly, use a brush for cleaning.
（3）will be cleaning the complete filter assembly back in, and then turn the influent and effluent at water stop valve can be.
|
