|
 |
Model： |
APF-06A |
|
Main accessories material： |
The standard flavone / Food grade stainless steel /aviation engineering plastics |
|
Water flow： |
2.6 m3/h ~ 4.2 m3/h |
|
Working pressure： |
0.2
Mpa~0.4 Mpa |
|
Suitable temperature： |
5℃~40℃ |
|
Function Description： |
flushing time memory button |
|
And out of the water caliber： |
1 inch ext 6 points(3/4英吋)活接變徑 |
|
Filtration precision： |
40 μm~90 μm（Micron） |
|
Dimensions (L x W x H)： |
158mm
x 80mm x 230mm |
Product description:
Is usually installed in the front end of the pipeline, mainly to remove the precipitated impurities and bacteria, microorganisms wreckage, rust, sediment, debris and other particulate impurities pipeline, the human body and skin to avoid harm; and domestic water heaters, solar energy, washing machine, water purifier, pipe network, heart valve, a high-end faucet, shower ... wading products, considerable protection, effectively extending the service life and the use of quality.
Features︰
1.
ABS anti-aging plastic Colorful cover, fashion, health.
2.
unique flushing time memory button, easily and accurately.
3.
Reinforced copper body, and the life of more than 50 years.
4.
Transparent explosion-proof housing.
Installation ︰
1.First inspections may be appropriate resettlement prefilter position, 20CM height (to be reserved to facilitate sewage).
2.Six taps and hex nut assembly, six taps fully wound raw material belt, then wound good connector components connected to a water purification mouth
Brought out processed using the same method to another outlet.
3. Ring onto the fitting components with large pieces of copper two link tightened, and then slowly open the inlet valve, in the absence of any leaks or water seepage, and that is to complete the installation.
Maintenance way︰Pre-filter to use after a period of time, to see whether the sediment filter impurities or dirt can be transparent filter housing
1.Sewage (sewage once a month)
（1）Turn off the water purification and water at the water stop valve, in order to avoid reflux.
（2）placing the container at the bottom of the drain valve body, open the drain valve for wastewater effluent.
（3 ）sewage is complete, open the influent and effluent at water stop valve can be.
2.Cleaning filter (every 3-6 months cleaning time)
（1）close the influent and effluent at water stop valve to avoid reflux.
（2）removal tool, turn on the transparent filter housing, remove the filter assembly, use a brush for cleaning.
（3）will be cleaning the complete filter assembly back in, and then turn the influent and effluent at water stop valve can be. |
